Products

These plastic set screws hold the TigerStop flip away above the beam. This item is a pack of ten set screws. (F0700). 3/8"-16 x 3/4" SSFP (set screw hex head) nylon. 

These are imperial and accept a hex wrench for adjustment and will work on pre- 2021 machines

Current products (post 2021) are metric and accept a flat head screwdriver for adjustment (NSS-M)

These plastic set screws hold the TigerStop flip away above the beam. This item is a pack of ten set screws. (F07001).  M10-1.5 x 20mm SSFP (set screw flat point) nylon. 

These are metric and accept a flat head screwdriver for adjustment - For post- 2021 machines

Legacy products (pre 2021) are imperial and accept a hex wrench for adjustment (NSS)

10" idle end sensor (also known as the far end sensor) for TigerStop. The idle end sensor signals the limit of travel far from the motor. IES2-10 is an idle-end sensor for a 10' working length (12' overall length) TigerStop. That's a 3.0 m working length or 3.7 m overall. 

Note: Learn how to troubleshoot the idle end sensors by watching this informational video. 

10/32" nut acorn NiP (nickel-plated).    

12" idle end sensor (also known as the far end sensor) for TigerStop. The idle end sensor signals the limit of travel far from the motor. IES2-12 is an idle-end sensor for a 12' working length (14' overall length) TigerStop. (That's a 3.7m working length or 4.3m overall.)

Note: Learn how to troubleshoot the idle end sensors by watching this informational video.

SawGear Measuring Bar 12' working length (14' overall length.) That's a 3.7 meter working length or 4.3 meter overall. 

The measuring bar is essentially a SawGear, but without the power head. Power heads can be mounted on either the left or the right side of the measuring bar, simply and quickly. In order to operate your SawGear a power head (PH) is required.

*NOTE: FREE GROUND SHIPPING DOES NOT APPLY ON ANY MACHINERY ITEMS IN THE SAWGEAR STORE COLLECTION. SHIPPING RATES WILL BE CALCULATED AND COLLECTED AFTER THE ONLINE ORDER IS PLACED TO GUARANTEE THE LOWEST FREIGHT RATE POSSIBLE. EMAIL ORDERS@TIGERSTOP.COM WITH ANY QUESTIONS.  

The TigerTurbo has two belts: a small drive belt and a much larger belt that moves the positioner. AT5-TT-012 is the large belt for a 12' working length (15' overall length) TigerTurbo. (That's a 3.7 m working length or 4.6 m overall.)

The TigerTurbo has two belts: a small drive belt and a much larger belt that moves the positioner.  AT5-TT-015 is the large belt for a 15' working length (18' overall length) TigerTurbo.  (That's a 4.6 m working length or 5.5 m overall.)  

The idle end sensor signals the limit of travel far from the motor. IES2-16 is an idle-end sensor for a 16' working length (18' overall length) TigerStop. (That's a 4.9 m working length or 5.5 m overall.) 

Note: Learn how to troubleshoot the idle end sensors by watching this informational video. 

The measuring bar is essentially a SawGear without the power head. Power heads can be mounted on either the left or the right side of the measuring bar, simply and quickly. MB16 is a 16' working length (18' overall length) measuring bar. (That's a 4.9 m working length or 5.5 m overall.) In order to operate your SawGear a power head (PH) is required.  

*NOTE: FREE GROUND SHIPPING DOES NOT APPLY ON ANY MACHINERY ITEMS IN THE SAWGEAR STORE COLLECTION. SHIPPING RATES WILL BE CALCULATED AND COLLECTED AFTER THE ONLINE ORDER IS PLACED TO GUARANTEE THE LOWEST FREIGHT RATE POSSIBLE. EMAIL ORDERS@TIGERSTOP.COM WITH ANY QUESTIONS. 

The TigerTurbo has two belts: a small drive belt and a much larger belt that moves the positioner.  AT5-TT-018 is the large belt for a 18' working length (21' overall length) TigerTurbo.  (That's a 5.5 m working length or 6.4 m overall.)  

These labels are compatible with TigerStop's direct thermal label printers.  Label dimensions are 2.25" by 1.25".  Each PR2-LBL includes three rolls of labels with 1000 labels per roll. 

The idle end sensor signals the limit of travel far from the motor. IES2-20 is an idle-end sensor for a 20' working length (22' overall length) TigerStop. (That's a 6.1 m working length or 6.7 m overall.) 

Note: Learn how to troubleshoot the idle end sensors by  watching this informational video. 

The measuring bar is essentially a SawGear without the power head. Power heads can be mounted on either the left or the right side of the measuring bar, simply and quickly. MB20 is a 20' working length (22' overall length) measuring bar. (That's a 6.09 m working length or 6.7 m overall.) In order to operate your SawGear a power head (PH) is required.  

*NOTE: FREE GROUND SHIPPING DOES NOT APPLY ON ANY MACHINERY IN THE SAWGEAR STORE COLLECTION. SHIPPING RATES WILL BE CALCULATED AND COLLECTED AFTER THE ONLINE ORDER IS PLACED TO GUARANTEE THE LOWEST FREIGHT RATE POSSIBLE. EMAIL ORDERS@TIGERSTOP.COM WITH ANY QUESTIONS. 

The TigerTurbo has two belts: a small drive belt and a much larger belt that moves the positioner.  AT5-TT-021 is the large belt for a 21' working length (24' overall length) TigerTurbo.  (That's a 6.4 m working length or 7.3 m overall.) 

The idle end sensor signals the limit of travel far from the motor.  IES2-22 is an idle-end sensor for a 22' working length (24' overall length) TigerStop. (That's a 6.7 m working length or 7.3 m overall.) 

Note: Learn how to troubleshoot the idle end sensors by watching this informational video. 

The idle end sensor signals the limit of travel far from the motor. IES2-24 is an idle-end sensor for a 24' working length (26' overall length) TigerStop. (That's a 7.3 m working length or 7.9 m overall.) 

Note: Learn how to troubleshoot the idle end sensors by watching this informational video.

The TigerTurbo has two belts: a small drive belt and a much larger belt that moves the positioner.  AT5-TT-024 is the large belt for a 24' working length (27' overall length) TigerTurbo.  (That's a 7.3 m working length or 8.2 m overall.) 

The TigerTurbo has two belts: a small drive belt and a much larger belt that moves the positioner.  AT5-TT-027 is the large belt for a 27' working length (30' overall length) TigerTurbo.  (That's an 8.2 m working length or 9.1 m overall.)