TigerSaw Parts

This belt connects the saw motor to the saw arbor in a TigerSaw 1000, TigerSaw 1000G2, or TigerSaw 2000. 

This is a replacement idle pulley for TigerSaw saw systems.  

This blade is compatible with the TigerSaw 1000 (second generation saw only) and the TigerSaw 2000. It is designed for cutting hollow aluminum extrusions. The diameter of this blade is 500 mm (19.7"), and it has 120 teeth.  

This blade is compatible with the TigerSaw 1000 and the TigerSaw 2000.  It is intended for wood applications where cut quality is the most important consideration. The diameter of this blade is 450 mm (17.7"), and it has 132 teeth.  

This blade is compatible with the TigerSaw 1000 and the TigerSaw 2000. It is designed for cutting hollow aluminum or non-ferrous extrusions.The diameter of this blade is 450 mm (17.7"), and it has 120 teeth. 

This blade is compatible with the TigerSaw 1000 (second generation saw only) and the TigerSaw 2000. It is intended for wood applications where cut quality is the most important consideration. The diameter of this blade is 500 mm (19.7"), and it has 144 teeth. 

TigerSaw safety latch key.

This is a printer cartridge for the inkjet printing system designed for absorbent surfaces like wood.

Note: This printer cartridge is incompatible with the inkjet printing system for non-absorbent surfaces. 

This is a box of 50 UV crayons for use with the crayon defecting option on TigerSaw 1000, TigerSaw 1000G2, or TigerSaw 2000.  

Learn more about Crayon Defect Marking in the below video.  

This blade is compatible with the TigerSaw 1000 (second generation saw system) and the TigerSaw 2000. It is designed for cutting solid aluminum and non-ferrous metal extrusions. The diameter of this blade is 500 mm (19.7"), and it has 60 teeth. 

This blade is compatible with the TigerSaw 1000 (second generation saw system) and the TigerSaw 2000. It is intended for wood applications where throughput is the most important consideration. The diameter of this blade is 500 mm (19.7"), and it has 60 teeth.  

This blade is compatible with the TigerSaw 1000 and the TigerSaw 2000. It is intended for wood applications where throughput is the most important consideration. The diameter of this blade is 450 mm (17.7"), and it has 60 teeth. 

This is the throat plate for the table top on the TigerSaw 1000 (second generation model, 2016-current) and TigerSaw 2000. It is not compatible with TigerSaw 1000G1 (models from 2013 and earlier).   

This blade is compatible with the TigerSaw 1000 and the TigerSaw 2000. It is designed for cutting solid aluminum and non-ferrous metal extrusions. The diameter of this blade is 450 mm (17.7"), and it has 60 teeth. 

Safety latch switch 4NO. 

This is the throat plate for the back fence on the TigerSaw 1000G2 and TigerSaw 2000. It is not compatible with TigerSaw 1000G1 (models from 2016 and before).  

This is a replacement pilot light for the TigerSaw 1000 and TigerSaw 2000. 

TigerSaw 2000 Base Blade Dust Ramp.