Products

M12 x 35mm HHCS G8.8 ZP (hex head cap screw grade 8.8 zinc-plated).  

Sensor luminescence box M12 for crayon marking.       

5/16"-18 x 0.3125" SSCP BO (set screw cup point black oxide).   

Shoulder bolt, OD12LN16, M10 Grade. 

Bolt, shoulder ,12mmX12mm M10.   

M10 x 20mm socket head cap screw, grade 8.8, zinc plated. 

M3X08 SHCS G12.9 B TB.

Socket Head Cap Screw M5 x 10, BO 12.9.

Connector solenoid DC (300mm), cable. 

Solenoid Valve, 24VDC 4 Way 6mm. 

The solenoid valve for the Standard Interconnect Kit includes the following items:

• 4 brass fittings (2 x 4mm and 2 x 6mm) 
• 1 muffler exhaust
• 1 cable assembly (2 pin DC)  

The spring buffer is a flat pushing attachment for the TigerStop. The pushing surface is 6.5 by 3 inches (16.5 by 7.6 cm). The spring buffer reach can be adjusted from 10 to 23 inches (25.4 to 58.4 cm) beyond the leading edge of the flip away.

TigerStop spring buffer foot plate.

This is a flat pushing attachment for the TigerTurbo or HeavyDuty 2. The pushing surface is 12.25 by 4 inches (31.1 by 10.2 cm). The heavy duty spring buffer reach is about 21.2" (53.8 cm) beyond the leading edge of the flip away. Left-handed means that the positioner is to the left of the integrated tool (a TigerTurbo to the left of a drill press, for instance).  

This is a flat pushing attachment for the TigerTurbo or HeavyDuty 2. The pushing surface is 12.25 by 4 inches (31.1 by 10.2 cm). The heavy duty spring buffer reach is about 21.2" (53.8 cm) beyond the leading edge of the flip away. Right-handed means that the positioner is to the right of the integrated tool (a TigerTurbo to the right of a drill press, for instance). 

The controller (CON5) is the interface for most TigerStop positioners, and consists of a keypad and screen. CON5 is compatible with TigerStop, TigerFence (and SLR), TigerTurbo, TigerRack, and HeavyDuty 2. CON5 requires an Amplifier (AMP6 or AMP5) and is not compatible with older controllers or with SawGear stop gauges. The standard controller can hold up to 99 cut lists when paired with cut list downloading software. For infinite cut lists you will need the Tablet Package. 

*Possible 2 week backorder*

Note: The CON5 price includes a $200.00 core charge, refunded if the previous controller is returned to TigerStop within 30 days of the new shipment. CON5 orders require the serial number of the machine that will receive the electronics. Failure to use the controller with the specified serial number can result in software compatibility issues. 

Protective controller cover for Version 5 controllers. Made from clear plastic. Helps protect the controller from metal and wood dust and lubricants. 

The standard interconnect kit is one way of integrating TigerStop machinery with your tool. A roller switch is used to inform the positioner when the tool is at rest, preventing simultaneous movement of the two machines. Additionally, that communication allows for semi-automatic pushing operations. An included solenoid valve can optionally be used to prevent air to the tool unless the positioner is on, referenced, and motionless. 4mm and 6mm fittings are included for the solenoid.  For tools that aren't pneumatic, the 24 volts powering the solenoid could be used to drive a relay, but you'll need to do some wiring. SIK is compatible with TigerStop, TigerFence, TigerCrossCut, TigerTurbo, TigerRack, and HeavyDuty 2.