SawGear Parts

The SawGear power head is the controller and drive system for a SawGear automated stop. The power head can easily detach from the unit and be mounted on the left or the right side of the machine. It can also be simply and quickly transferred between measuring beams for those who want to travel between a shop and a jobsite, for example. 

*Possible 2-4 week backorder*

Important information for ordering this item: 

• It is necessary to specify the machine serial number when ordering a new SawGear power head. Please email orders@tigerstop.com with your serial number. Without the serial number this item will not ship.  
• If you need help determining your SawGear's serial number watch the below video or contact service@tigerstop.com. 

The bench mount brackets allow you to attach the SawGear aluminum extrusion measuring bar to your tables of choice. Because we don't know what material the bracket will be mounted on, fasteners are not included. Please note that BR-BM is a set of two bench mount brackets.  

*Note: Requires customer to purchase longer bolts (M5 x 15) when using TigerStop Roller Tables.

The SawGear Flip Away is the external portion of the SawGear carriage. It holds the stop bar and is hinged so it can be lifted out of the way. 

The SawGear Crown Molding Foot is specially designed for cutting crown, baseboard, and trim. The flat pusher foot component is 5.1" x .5" x 4". 

The internal carriage connects the SawGear belt inside the beam to the flip away outside the beam. It ships with plastic glides and set screws.  

The SawGear stop bar comes standard with every SawGear order. The stop bar is used to position material accurately for processing. Type in your desired length, press start, and then place material up against the stop bar for repeatable accuracy.  

To watch the SawGear stop bar in action check out the below video. 

The SawGear has two belts: a small drive belt in the power head and a much larger belt in the measuring bar. SG08-AT5 is the large belt for an 8' working length (10' overall length) SawGear. (That's a 2.4 m working length or 3.0 m overall.)   

The SawGear has two belts: a small drive belt in the power head and a much larger belt in the measuring bar. SG20-AT5 is the large belt for a 20' working length (22' overall length) SawGear. (That's a 6 m working length or 6.7 m overall.)   

The SawGear has two belts: a small drive belt in the power head and a much larger belt in the measuring bar. SG12-AT5 is the large belt for a 12' working length (14' overall length) SawGear. (That's a 3.7 m working length or 4.3 m overall.) 

The SawGear has two belts: a small drive belt in the power head and a much larger belt in the measuring bar. SG16-AT5 is the large belt for a 16' working length (18' overall length) SawGear. (That's a 4.9 m working length or 5.5 m overall.)   

One table leg for a SawGear portable table. SawGear table legs are easily set up and adjusted so you can quickly maneuver from the shop to the jobsite.  

SawGear measuring bar pulley assembly.   

Locking Handle for SawGear flip away.

This is a replacement SawGear motor.

This cable connects the SawGear motor to the circuit board inside the power head. 

The SawGear has two belts: a small drive belt in the power head and a much larger belt in the measuring bar. SG-DB is the small drive belt in the Power Head (PH). 

SawGear replacement keypad membrane. 

This rotary encoder works with SawGear only. The SawGear Encoder Cable is included as well.   

The SawGear Touch power head is the controller and drive system for a SawGear Touch automated stop. The power head can easily detach from the unit and be mounted on the left or the right side of the machine. It can also be simply and quickly transferred between measuring beams for those who want to travel between a shop and a jobsite, for example. 

The SawGear Touch Powerhead is a fantastic way to upgrade your old SawGear unit to a SawGear Touch. Simply swap out the power heads and acccess new software programs and a unique touch screen interface.

Every SawGear Touch PowerHead comes with Cut List Downloading, Optimization, Framing Software, Crown+Miter Pro Software, and more!   

*Shipping Begins May 15th, 2023

Important information for ordering this item: 

• It is necessary to specify the machine serial number when ordering a new SawGear Touch power head. Please email orders@tigerstop.com with your serial number. Without the serial number this item will not ship.  
• If you need help determining your SawGear Touch's serial number watch the below video or contact service@tigerstop.com.  
• Approximate Dimensions: 9" 8" x 13"